Paper Bead Making Tools
Due to the higher cost in manufacturing, all of the products I make, with the wood handles, will be discontinued after my current inventory is gone. Get yours now while supplies last.
Adjustable Length
These handmade paper bead rollers are designed to have adjustable length split winding pins. They come in 5 sizes ranging from 5/64" to 3/16" and you can pull out the split winding pins to about 3" long.
They come in a variety of different prints and colors so you can choose your favorite! There is the original Rainbow Filigree print, followed by Candy Stick and soon to be released Zebra Print. There will also be a 4th colorful set in the future.
Short Split Pin Paper Bead Rollers
These handmade split pin paper bead rollers are not adjustable length. The 1.5" long winding pins are split all the way through and stabilizer beads are not needed. They are made with surgical grade shiny smooth stainless steel so they will never rust or corrode and your paper beads will glide off with ease as long as you don't wind your paper strip too tight.
These rollers are made in a way I can guarantee the pins will never come out. The caps, where the pins are, on the handle are permanent and cannot be removed. They are not glued on but pressed on and very tight.
Slotted Winding Pin
These handmade slotted paper bead rollers have a winding tip that is hollow with a slot down one side. This style winding tip is a favorite among people who make paper bead rollers and are the most popular type. The metal I use to make these rollers is a shiny high quality stainless steel that won't rust or corrode over time so these rollers will last a lifetime.
