Paper Bead Crafts Eyelet Setters
What are They and How do They Work?
A size‑matched tool for setting metal eyelets into paper beads. The stand and stainless‑steel shaft keep everything aligned while the jammer presses both eyelets into place, creating a clean metal core on each side of the bead. Each kit includes instructions, a 50‑count packet of eyelets sized to match the bead’s hole, a matching paper bead roller, a bead jammer, stand, and the setter. You will receive a randomly chosen print and color set when you order the 1/16in size eyelet setter.
Have you been struggling with setting those little eyelets inside your Pandora style or large hole beads or other bead hole sizes? Do they keep slipping out of your fingers and landing on the floor? Well, I have a solution for you! It is a tool called the Bead Easy Eyelet Setter!
I know you have seen eyelet setters before but all of the other eyelet setters out there are not meant for setting the eyelets into beads, they are meant for setting eyelets into flat materials such as leather, fabric, cardboard, paper, plastic sheeting and more. Now there is an eyelet setter designed for use with large hole beads!
- The pin on the setters are designed to fit through the various sized eyelets for beads with holes that match according to the chart above.
- Get your eyelets set in half the time by setting both eyelets at the same time!
- Setting Pin is Made of Stainless Steel, 1-1/8" long by 1/8" thick.
- Handles are made with 3D Printed Parts-(PLA), Polypropylene plastic, and paper.
- This tool is designed to match the other 3D printed paper bead rollers I offer.
- Can set eyelets into beads with holes from 1mm up to 5mm in diameter.
- Package comes with the tool, a stand, a bead roller, 1 random color packet of 50 eyelets and a sheet of instructions.